. .

Productlist

View:
  • 0-42220-002
    Length of cable: 20,00 m
    Height of starting station: 2,90 m (above hill=play level)
    Height of arrival station: 3,05 m (above play level)
    Cross beam: hot-dip galvanized steel, powder coated and stove enamelled, colour: red/RAL 2002
    Cable ride support frame: hot-dip galvanized steel
    Cable fastening with tensioning device for easy linear tightening of the cable with irreversible trapezoid thread spindle.
    Cable: hot-dip galvanized steel, with shock absorbers.
    Pulley: stainless sheet steel with wheels of polyamid, run on sealed anti-friction bearings.
    Handle: stainless steel chain, fitted with a flexible red rubber moulded grip.
    Pendulum seat: rubber with aluminium insert.
    In case of installation on flat ground the modelling of the starting station has to be done according to installation instructions after mounting.
    The tension required for the functionality of the cable car is only possible if the site according to our specifications is adjusted.
    markunmark
  • 0-42225-001
    Length of cable: 25,00 m
    Height of starting station: 2,90 m (above hill=play level)
    Height of arrival station: 2,90 m (above play level)
    Cross beam: hot-dip galvanized steel, powder coated and stove enamelled, colour: red/RAL 2002
    Cable ride support frame: hot-dip galvanized steel Ø 88,9 x 5,6 mm.
    Cable fastening with tensioning device for easy linear tightening of the cable with irreversible trapezoid thread spindle.
    Cable: hot-dip galvanized steel, with shock absorbers.
    Pulley: stainless sheet steel with wheels of polyamid, run on sealed anti-friction bearings. Handle: stainless steel chain, fitted with a flexible red rubber moulded grip. Pendulum seat: rubber with aluminium insert. 
    In case of installation on flat ground the modelling of the starting station has to be done according to installation instructions after mounting. The tension required for the functionality of the cable car is only possible if the site according to our specifications is adjusted.
    markunmark
  • 0-42230-001
    Length of cable: 30,00 m
    Height of starting station: 2,90 m (above hill=play level)
    Height of arrival station: 2,90 m (above play level)
    Cross beam: hot-dip galvanized steel, powder coated and stove enamelled, colour: red/RAL 2002
    Cable ride support frame: hot-dip galvanized steel Ø 88,9 x 5,6 mm
    Cable fastening with tensioning device for easy linear tightening of the cable with irreversible trapezoid thread spindle.
    Cable: hot-dip galvanized steel, with shock absorbers.
    Pulley: stainless sheet steel with wheels of polyamid, run on sealed anti-friction bearings. Handle: stainless steel chain, fitted with a flexible red rubber moulded grip.
    Pendulum seat: rubber with aluminium insert.
    In case of installation on flat ground the modelling of the starting station has to be done according to installation instructions.  The tension required for the functionality of the cable car is only possible if the site according to our specifications is adjusted.

    markunmark
  • 0-42223-000
    Area: 3,65 x 22,50 m
    Minimum space: 5,60 x 24,25 m
    Length of cable: 20,00 m
    Height of starting station: 3,90 m (above play level)
    Height of arrival station: 3,05 m (above play level)
    Cross beam: hot-dip galvanized steel, powder coated and stove enamelled, colour: red/RAL 2002
    Cable ride support frame: hot-dip galvanized steel Ø 88,9 x 5,6 mm.
    Cable fastening with tensioning device for easy linear tightening of the cable with irreversible trapezoid thread spindle.
    Cable: hot-dip galvanized steel, with shock absorbers.
    Pulley: stainless sheet steel with wheels of polyamid, run on sealed anti-friction bearings.
    Handle: stainless steel chain, fitted with a flexible red rubber moulded grip.
    Pendulum seat: rubber with aluminium insert.
    The modelling of the starting and arrival station is not necessary because of the integrated ramp.
    markunmark
  • 0-42228-001
    Minimum use zone: 3,65 x 27,50 m Safety area: 5,70 x 29,25 m Length of cable: 25,00 m Height of starting station: 3,90 m (above play level)
    Height of arrival station: 2,90 m (above play level)
    Cross beam: hot-dip galvanized steel, powder coated and stove enamelled,
    colour: red/RAL 2002 Cable ride support frame: hot-dip galvanized steel Cable fastening with tensioning device for easy linear tightening of the cable with irreversible trapezoid thread spindle.
    Cable: hot-dip galvanized steel, with shock absorbers.
    Pulley: stainless sheet steel with 3 wheels of polyamid, run on sealed anti-friction bearings.
    Handle: stainless steel chain, fitted with a flexible red rubber moulded grip.
    Pendulum seat: rubber with aluminium insert.
    The modelling of the starting and arrival station is not necessary because of the integrated ramp. 
    markunmark
  • 0-42233-001
    Minimum use zone: 3,65 x 32,50 m Safety area: 5,70 x 34,25 m Length of cable: 30,00 m Height of starting station: 3,90 m (above play level) Height of arrival station: 2,90 m (above play level) Platform-/Ramp covering: Robinia 95 x 30 mm Cross beam: hot-dip galvanized steel, powder coated and stove enamelled, colour: red/RAL 2002 Cable ride support frame: hot-dip galvanized steel Ø 88,9 x 5,6 mm Cable fastening with tensioning device for easy linear tightening of the cable with irreversible trapezoid thread spindle. Cable: hot-dip galvanized steel, with shock absorbers. Pulley: stainless sheet steel with 3 wheels of polyamid, run on sealed anti-friction bearings. Pendulum seat: rubber with aluminium insert. Handle: Stainless steel chain, fitted with a flexible red rubber moulded grip.
    The modelling of the starting and arrival station is not necessary because of the integrated ramp.
    markunmark
  • 0-42240-000
    Length of cable: 40,00 m
    Height of starting station: 2,70 m (without hill)
    Height of arrival station: 2,70 m (without hill)
    Cross beam: hot-dip galvanized steel.
    Cable ride support frame: hot-dip galvanized steel with peg disk attachment Ø 240 mm
    Cable fastening with tensioning device for easy linear tightening of the cable with irreversible trapezoid thread spindle.
    Cable: hot-dip galvanized steel, with shock absorbers.
    Pulley: stainless sheet steel with 3 wheels of polyamid, run on sealed anti-friction bearings.
    Handle: stainless steel chain, fitted with a flexible red rubber moulded grip.
    Pendulum seat: rubber with aluminium insert.
    In case of installation on flat ground the modelling of the starting and arrival station has to be done according to installation instructions.
    markunmark
  • 0-42250-000
    Length of cable: 50,00 m
    Height of starting station: 2,70 m (without hill)
    Height of arrival station: 2,70 m (without hill)
    Cross beam: hot-dip galvanized steel.
    Cable ride support frame: hot-dip galvanized steel with peg disk attachment Ø 240 mm
    Cable fastening with tensioning device for easy linear tightening of the cable with irreversible trapezoid thread spindle.
    Cable: hot-dip galvanized steel, with shock absorbers.
    Pulley: stainless sheet steel with 3 wheels of polyamid, run on sealed anti-friction bearings.
    Handle: stainless steel chain, fitted with a flexible red rubber moulded grip.
    Pendulum seat: rubber with aluminium insert.
    In case of installation on flat ground the modelling of the starting and arrival station has to be done according to installation instructions
    markunmark
  • 0-42242-000
    Length of cable: 40,00 m
    Height of starting station: 2,70 m (without hill)
    Height of arrival station: 2,70 m (without hill)
    Cross beam: hot-dip galvanized steel.
    Cable ride support frame: hot-dip galvanized steel with peg disk attachment Ø 240 mm
    Cable fastening with tensioning device for easy linear tightening of the cable with irreversible trapezoid thread spindle.
    Cable: hot-dip galvanized steel, with shock absorbers.
    Pulley: stainless sheet steel with 3 wheels of polyamid, run on sealed anti-friction bearings.
    Handle: stainless steel chain, fitted with a flexible red rubber moulded grip.
    Pendulum seat: rubber with aluminium insert.
    In case of installation on flat ground the modelling of the starting station has to be done according to installation instructions
    markunmark